Introduced for 2016, this Lynx fitting kit fits the older 2007 and earlier models. Please contact us if you wish to fit this kit to the 2008 model. All hardware needed for installation is included in this kit and most of the installation work is focused on the fitment of the instruments onto the Lynx dashboard which is attached to the top triple clamps using brackets from the top triple pinch bolts. You will need to replace the OEM speedo instruments with a digital unit to use this kit. You will be removing the OEM headlight frame, lights and forward bodywork and the Lynx will fit with any aftermarket gas tanks. The OEM indicators can be relocated onto the sides of the Lynx dashboard, but we recommend fitting some smaller ones with this kit. As with all Lynx kits, ample room has been left for the owner to install a GPS unit above the OEM instruments along with any other switches and sockets etc. Installation time will vary depending on the complexity of the owner’s dashboard layout, but at least 4 hours should be allowed to complete the process. Owners are also encouraged to inspect the installation instructions before ordering.